EMX CS202S-5 CARSENSE202 SINGLE PIECE VEHICLE MOTION DETECTOR

EMX’s CarSense202 is a compact, single-piece vehicle motion detector that operates by detecting changes in Earth’s magnetic field that occur near the probe. The CS303 will only detect moving vehicles at a fixed detection range of 12 ft. at a minimum speed of 5 mph, and will not detect stationary vehicles. This detector may be used as a free exit sensor to allow gates to open and guests to exit without the use of a key fob or passcode. The CS202 may also be wired to notify a home automation system or security system that a vehicle is moving down a driveway. The CS202 vehicle motion detector is available from Action Industries in 50, 100, or 150 foot lead lengths.

Features:

• EMX CarSense202 Vehicle Motion Detector

• Only detects moving vehicles and will not detect stationary vehicles

• Detects changes in Earth's magnetic field caused by moving vehicles

• Fixed detection range of 12 feet at a minimum speed of 5 mph

• Detects ferrous metals; will not detect aluminum, but will detect any moving ferrous metallic object

• Probe must be stationary to function properly

• Allows entry to gates without use of a key-fob or passcode

• Available in 50, 100, and 150 ft. lead lengths

Specs:

• Power: 9-41 VDC or 6-29 VAC

• Standby Current: 0.250 mA

• Detection Current 12 mA

• Range Sensitivity: 12 ft. @ 5 mph min. Speed

• Output on Time: Approximately 1 second

• Surge Protection: Probe input circuitry protected by surge suppressors

• Relay output configuration: Form C (SPDT)

• Relay contact rating: 1 A @ 24 VDC / 1 A @ 120 VAC

• Operating Temperature: -40°C to 82°C (-40°F to 180°F) 0 to 95% relative humidity

• Probe Housing Material: PVC watertight

• Probe Dimensions (L x Diameter): 24” x 1”

• Probe cable: 5-wire, direct burial